
TH·SJ301 (F6A0-EL8)
F6A0-EL8 Submerged Arc Welding Flux | For use with THM-43 wire.
Application
- []
DETAILS
TH·SJ301 (F6A0-EL8) is a calcium-silicon-type agglomerated submerged arc welding flux.
Features
- Mechanical properties describe the deposited weld metal produced with the specified submerged arc wire, not the flux alone.
- Basicity: approximately 1.0
- Grain sizes: 2.0–0.3 mm (10–60 mesh) or 2.0–0.45 mm (10–40 mesh)
- The F6A0-EL8 designation identifies a flux–electrode combination. The reported mechanical properties apply to weld metal deposited with THM-43 wire.
Typical Applications
- Single-pass and multi-pass submerged arc welds in carbon and low-alloy structural steels, using the specified THM-43 wire and flux combination.
Flux–Wire Combination
- Mechanical properties apply to deposited weld metal produced with TH·SJ301 and THM-43.
WARNING
- Re-dry the flux at 300–350°C for 2 hours before use. Remove rust, oil, moisture, and other contaminants. Heat input affects deposited weld metal mechanical properties; lower heat input is recommended.
| Test Item | Sulfur (%) | Phosphorus (%) | Moisture content (%) | Mechanical inclusions (%) |
|---|---|---|---|---|
| Requirement | ≤0.05 | ≤0.06 | ≤0.09 | ≤0.30 |
| Typical Result | 0.030 | 0.028 | 0.01 | 0.1 |
| Test Item | Rm (MPa) — TH·SJ301/THM-43 | ReL / Rp₀.₂ (MPa) — TH·SJ301/THM-43 | A (%) — TH·SJ301/THM-43 | KV₂ (J) at −20 °C — TH·SJ301/THM-43 |
|---|---|---|---|---|
| Requirement | 430-600 | ≥330 | ≥20 | ≥27 |
| Typical Result | 460 | 375 | 28 | 80 |